Air Source Heat Pump Suppliers
Air Source Heat Pump
Our 4 generation water heaters are air source Heat pump water heater. The Air Source Water Heaters are energy saving, Compact1 Eco friendly and affordable. The Diesel or Gas type conventional water heaters are too Expensive more pollution and more maintenance required. The Air sources heat pumps uses ambient temperature to heat water, no pollution & cheaper operation cost.
WORKING PRINCIPLE:
The main parts of the heat pumps are Evaporator, Heat Exchanger and compressor. The low temperature , low pressure refrigerator in the liquid state is made to pass through the evaporator where it absorbs heat from the ambient air and vaporises. This Gaseous refrigerant is passed through a compressor where it is compressed to very high pressure. Since temperature is directly proportional to pressure the temperature of the refrigerant also increases, this high temperature , high pressure refrigerant is passed through a heat exchanger where will be flowing in the counter directions, Hence the water absorbs the refrigerant's temperature and the water is heated. The refrigerant is passed through an expansion valve to reduce its pressure as well and the cycle continues.
COMPARISON OF OPERATING COST OF WATER HEATERS OPERATING FROM 20 TO 60 DEGREE CELSIUS TO HEAT UP 1000 LTS.
The main parts of the heat pumps are Evaporator, Heat Exchanger and compressor. The low temperature , low pressure refrigerator in the liquid state is made to pass through the evaporator where it absorbs heat from the ambient air and vaporises. This Gaseous refrigerant is passed through a compressor where it is compressed to very high pressure. Since temperature is directly proportional to pressure the temperature of the refrigerant also increases , this high temperature , high pressure refrigerant is passed through a heat exchanger where will be flowing in the counter directions, Hence the water absorbs the refrigerant's temperature and the water is heated.
Service
AIR SOURCE HEAT PUMP WATER HEATER
The heat pump works by taking heat and using it to heat low pressure liquid refrigerant in the heat pump's evaporator vaporizing. Tha liquid refrigerant then passes through the Compressor which raises the refrigerant pressure and thus the temperature as well.
APPLICATIONS
CM pump with pressure controller is used for constant water pressure.Can be ideal when spaceisconstraint near overhead tank.It also hasdry run ning protection, incase of nowater in thepipeline.CM pum p is also supplied with pressure ta nk for constant wa ter pressure.When the pressure drops to the pre-set level, the pump will start-uo and when the water consumption dropsagain,the outlet pressu re will rise to a pre-set stop pressure after which the pu mpwill stop.Available from 8Its tolOO Itstank range.
.jpeg)
